 |
 |
 |
Step 1 - Check the contents
Remove all the parts from the box, lay them out, identify them
and check the contents.
|
|
Step 2 - Choose a Pole location
Select the pole location, measure the ceiling height and place
the base in postion.
|
 |
|
 |
Step 3 - Choose your extensions
Use the height chart to select any extensions (if required). |
|
Step 4 - Locate the ceiling joists
Locate the ceiling joists by tapping with a finger or using a
stud/joist locator. Adjust the base position to mid point between
the joists.
|
 |
|
 |
Step 5 - Fit the extensions to the base (if
required)
Attach any extensions to base insert. Extensions always fit at
the bottom of the pole smallest first.
|
|
Step 6 - Attach lower main pole.
Screw the lower main pole onto the extension or base insert. Tighten
firmly by hand.
|
 |
|
 |
Step 7 - Prepare Adjuster rod
Take off the adjuster cover tube and wind the adjuster locking
nut to the top of the adjuster.
|
|
Step 8 - Fit adjuster
Screw the adjuster into upper main pole until the nut touches
the top of the pole.
|
 |
|
 |
Step 9 - Fit adjuster cover
Slide adjuster cover into position just covering the O-ring.
|
|
Step 10 - Attach the Upper Dome
Slide the upper dome onto adjuster shaft. X-Pole uses a long adjuster
shaft with 3 bearings to lock the dome at 90 degrees to the Pole.
|
 |
|
 |
Step 11 - Fit the poles together
Attach upper pole assembly to lower pole. Screw up tightly and
hold vertical.
|
|
Step 12 - Tighten Adjuster
Unscrew the adjuster by hand until it is firm against the ceiling.
Make sure the upper dome is flat.
|
 |
|
 |
Step 13 - Tighten the tubes
Using the tightening and release rods tighten the pole sections
firmly but not over tight.
|
|
Step 14 - Final check
Tighten pole adjuster with spanner until it is really firm. Check
for movement and retighten if there is any movement.
|
 |
|
 |
Step 15 - Fit adjuster Cover
Slide the adjuster cover up, press in the two sprung pins and
lock in place |
|
Step 16 - Ready to go!
After a final check for movement X-pole is ready for use. Where
ever it's used X-Pole is up and ready for action in minutes. |
