|
No ceiling fixings required |
|
Articulating base - easy to set up on uneven
floors |
|
|
Static or spinning - uses 6 ball bearings, two
hidden screws to lock/unlock |
|
Double width pole support dome - covers 2 ceiling
joists |
|
|
50mm (1.96”) Chromed Steel - as used by the professionals |
|
Angular stability lock - helps stabilise your
X-Pole |
|
|
Expandable height - from 2235mm (7' 4") to 2745mm
(9') straight from the box |
|
DVD included - together with comprehensive pictorial
assembly instructions |
|
|
Screw together joints - for maximum strength,
stability and smoothness |
|
Multi functionality - with optional parts, use
as a table or plasma screen mount |
|
|
Easy to use height adjuster - complete with cover |
|
|
|
 |
Screw together high precision
joints, almost seamless
X-Pole’s unique precision machined, screw together, connections
(not slot together) create rock solid stability, extremely
high pole strength and, more importantly for the dancer,
smooth seams. |
|
Low Profile Articulating
base for uneven floors
X-Pole has a uniquely designed, low profile (flat, not
angled, so the dancers feet will not side off), non invasive
base, which compensates for uneven floors. Also unique
is it's 3° angle lock which adds to X-Poles stability. |
 |
Static or spinning, easy
to convert
X-Poles converts from static to spinning mode in 15 seconds.
Simply undo or re-tighten two hidden screws. Spinning
units contain a total of 6 ball bearings for maximum stability
and durability. |
 |
Extra wide support dome
with easy to use height adjuster
X-Poles extra wide 15" support dome creates a self locking
moment for added stability. The upper adjuster, which
is easy to tighten due to it's fine thread, has a simple
slide in place cover enhancing X-Poles appearance. (Cover
not shown) |
X-Pole Set Contents
| X-Pole is supplied
as a complete set including a 60 minute instructional
DVD. The set contains all the parts needed to assemble
a pole for heights from 2235~2745mm (88”~108”).
With constant product development X-Pole is continually
being improved and the lastest Chrome X-Poles are now
supplied with 2x carry cases and a tool wallet. One
carry case is for the pole tubes and will carry all
the extensions you will need for a single pole. The
other case, the round one, is for the Upper support
and base. This new concept is lighter for transporation
and easier to store.
Items required but not supplied: Tape measure, ladders
and optional stud finder to locate joists. See what
is a stud finder? in FAQ’s.
X-Pole Set
1. 250mm Extension
2. 125mm Extension
3. Height Adjuster
4. Adjuster Cover
5. Main Pole A
6. Main Pole B
7. Pole Support Dome
8. Articulating Base
9. Carry Cases (x2)
10. Wallet of X-Pole tools
|
|
| |
|
|
